Review of ultrasound-guided labeling: exploring its potential in teaching cadaveric ligaments during anatomical dissection courses.

Objectives: This scoping review aimed to give an overview of the existing literature about ultrasound-guided labeling techniques of human cadaver ligaments and tried to work out the possibilities of integrating ultrasound into dissection courses. Methods: A literature review was carried out on the 3rd of January 2023, with relevant studies discovered in the following databases: MEDLINE, EMBASE, CENTRAL, BIOSIS Previews and Web of Science Core Collection. Grey literature was also considered. The reference lists of all relevant papers were scanned. Only ultrasound studies on human cadaver ligaments were included. The included studies' general characteristics and ultrasound-guided approaches to label the ligaments were taken from them and examined. Results: The search found 8899 matches, but only 96 of them met the criteria. The transverse carpal ligament (15.62%) and the annular pulleys (19.79%) were the ligaments that had received the greatest research attention. Twenty-three studies are included in the methodological analysis. Both the marking substrate and the injected volume were diverse. Although 65% of the included studies achieved 100% accuracy using the ultrasound directed labeling approaches. Conclusions: Ultrasound-guided labeling techniques achieve a high accuracy. Therefore, this methodology could be a potential teaching tool for students during the dissection course. But caution is advised in drawing general conclusions because of the small sample sizes and different methodologies in the studies. Future larger-scale research is necessary.

High Expectations Among Patients Who Have Undergone TKA Do Not Correlate With Satisfaction.

BACKGROUND: One of five patients is dissatisfied with the outcome of TKA. With the increasing number of TKAs, this affects many patients. It has been suggested that high expectations may influence satisfaction, but the relationship between preoperative patient expectations and postoperative patient satisfaction remains poorly understood. QUESTIONS/PURPOSES: (1) Are preoperative patient expectations correlated with postoperative satisfaction? (2) Are expectations correlated with patient characteristics or patient-reported outcome measures (PROMs)? (3) Is satisfaction correlated with patient characteristics or PROMs? (4) Do patients report specific items as more relevant to their expectations? METHODS: This was a single-center, observational, retrospective, comparative study involving patients who underwent TKA. Between December 2020 and June 2022, three senior surgeons performed 306 TKAs. Of these, 76% (234) had the preoperative PROMs required for this study, and of these, 82% (193) had completed PROMs at the 12-month follow-up interval and were analyzed. Of the 193 included patients, 53% (102) were women; the mean age was 68 ± 9 years. Data were collected at baseline, 4 months, and 12 months. Twelve months of follow-up has been shown to be adequate in studies with PROMs. Patient expectations were measured using the validated Hospital for Special Surgery Knee Replacement Expectation Survey on a scale from 0 to 100, with higher scores indicating higher expectations. We also assessed patient satisfaction, the Knee injury and Osteoarthritis Outcome Score, Forgotten Joint Score, High-Activity Arthroplasty Score, EQ-5D-3L, and the objective Knee Society Score. Bivariate linear correlations were analyzed using the Pearson or Spearman test. RESULTS: Preoperative patient expectations did not correlate with postoperative satisfaction. The mean Hospital for Special Surgery Knee Replacement Expectation Survey score was 82 ±16 points and did not correlate with satisfaction at either 4 months (r = -0.061; p = 0.42) or 12 months (r = -0.126; p = 0.11). Expectations did not correlate with patient characteristics or any of the preoperative or postoperative PROMs or the Knee Society Score. Patient satisfaction was 88% (158 of 179) at 4 months and 83% (160 of 193) at 12 months and did not correlate with patient characteristics or any of the preoperative PROMs or Knee Society Score. Patient satisfaction was medium to strongly correlated with postoperative PROMs and Knee Society Score. The Hospital for Special Surgery Knee Replacement Expectation Survey items with the most frequent expected improvement were "ability to walk" (99% [192 of 193]), "go downstairs" (99% [191 of 192]), and "go upstairs" (99% [192 of 193]). CONCLUSION: Preoperative expectations were not correlated with postoperative satisfaction or PROMs. Surgeons should be aware that patients have high expectations. However, these expectations appear to be less relevant in determining postoperative satisfaction. LEVEL OF EVIDENCE: Level III, therapeutic study.

Geometric Cuts by an Autonomous Laser Osteotome Increase Stability in Mandibular Reconstruction With Free Fibula Grafts: A Cadaver Study.

BACKGROUND: Nonunion and plate exposure represent a major complication after mandibular reconstruction with free fibula flaps. These drawbacks may be resolved by geometric osteotomies increasing intersegmental bone contact area and stability. PURPOSE: The aim of this study was to compare intersegmental bone contact and stability of geometric osteotomies to straight osteotomies in mandibular reconstructions with free fibula grafts performed by robot-guided erbium-doped yttrium aluminum garnet laser osteotomy. STUDY DESIGN, SETTING, SAMPLE: This cadaveric in-vitro study was performed on fresh frozen human skull and fibula specimens. Computed tomography (CT) scans of all specimens were performed for virtual planning of mandibular resections and three-segment fibula reconstructions. The virtual planning was implemented in a Cold Ablation Robot-guided Laser Osteotome. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLE: For predictor variables, straight and geometric puzzle-shaped osteotomies were designed at resection of the mandible and corresponding fibula reconstruction. MAIN OUTCOME VARIABLES: The primary outcome variable was the stability of the reconstructed mandible investigated by shearing tests. Moreover, secondary outcome variables were the duration of the laser osteotomies, the contact surface area, and the accuracy of the reconstruction, both evaluated on postsurgical CT scans. COVARIATES: Covariables were not applicable. ANALYSES: Data were reported as mean values (± standard deviation) and were statistically analyzed using an independent-sample t-test at a significance level of α = 0.05. Root mean square deviation was tested for accuracy. RESULTS: Eight skulls and 16 fibula specimens were used for the study. One hundred twelve successful laser osteotomies (96 straight and 16 geometrical) could be performed. Geometric osteotomies increased stability (110.2 ± 36.2 N vs 37.9 ± 20.1 N, P < .001) compared to straight osteotomies. Geometric osteotomy of the fibula took longer than straight osteotomies (10.9 ± 5.1 min vs 5.9 ± 2.2 min, P = .028) but could provide larger contact surface (431.2 ± 148.5 mm2 vs 226.1 ± 50.8 mm2, P = .04). Heat map analysis revealed a mean deviation between preoperational planning and postreconstructive CT scan of -0.8 ± 2.4 mm and a root mean square deviation of 2.51 mm. CONCLUSION AND RELEVANCE: Mandibular resection and reconstruction by fibula grafts can be accurately performed by a Cold Ablation Robot-guided Laser Osteotome without need for cutting guides. Osteotomy planning with geometric cuts offers higher stability and an increased bone contact area, which may enhance healing of the reconstructed mandible.

Comparison of Responsiveness of Patient-Reported Outcome Measures After Total Knee Arthroplasty.

BACKGROUND: The aim of this study was to evaluate the responsiveness of different patient-reported outcome measures in patients with primary total knee arthroplasty (TKA). METHODS: In this prospective observational study, we assessed patients with TKA before the surgery, after 4 months, after 1 year, and after 2 years. Measures were the objective Knee Society Score (KSS) and the following patient-reported outcome measures: Knee injury and Osteoarthritis Outcome Score (KOOS), KOOS-12, Forgotten Joint Score (FJS-12), High-Activity Arthroplasty Score, and EQ-5D-3L. Responsiveness was determined by effect size (ES), standardized response mean (SRM), area under the receiver operating characteristics curve, floor and ceiling effects, and hypothesis testing. RESULTS: We analyzed data from 309 TKAs (272 patients, 56% female). The ES and SRM for the change in KSS, KOOS, KOOS-12, FJS-12, and EQ-5D-3L from baseline to each follow-up were large (>0.8). The largest responsiveness from baseline to follow-up was found for the KSS, KOOS/KOOS-12 quality of life, KOOS-12 summary, KOOS-12 pain, and FJS-12 (2.0 > ES <3.9, 1.4 > SRM <2.4). The area under the curve from baseline to each follow-up was ≥0.7 for KOOS, KOOS-12, and FJS-12 (range 0.71 to 0.95) and <0.7 for KSS and EQ-5D-3L (range 0.65 to 0.74). We found floor or ceiling effects in the KOOS, KOOS-12, and EQ-5D-3L, but not in the KSS, FJS-12, and High-Activity Arthroplasty Score. CONCLUSIONS: Our study demonstrated that responsiveness differed between the various measures. The KOOS-12 and FJS-12 showed the greatest internal and external responsiveness, although ceiling effects occurred in the KOOS-12.

Satisfaction after total knee arthroplasty: a prospective matched-pair analysis of patients with customised individually made and off-the-shelf implants.

PURPOSE: Customised individually made (CIM) total knee arthroplasty (TKA) was introduced to potentially improve patient satisfaction and other patient-reported outcome measures (PROMs). The purpose of this study was to compare PROMs, especially patient satisfaction, of patients with CIM and OTS TKA in a matched-pair analysis with a 2-year follow-up. METHODS: This is a prospective cohort study with a propensity score matching of 85 CIM and 85 off-the-shelf (OTS) TKA. Follow-up was at 4 months, 1 year and 2 years. The primary outcome was patient satisfaction. Secondary outcomes were as follows: overall improvement, willingness to undergo the surgery again, Knee injury and Osteoarthritis Outcome Score (KOOS), Forgotten Joint Score (FJS-12), High-Activity Arthroplasty Score (HAAS), EQ-5D-3L, EQ-VAS, Knee Society Score (KSS) and surgeon satisfaction. RESULTS: Patient satisfaction ranged from 86 to 90% and did not differ between CIM and OTS TKA. The EQ-VAS after 4 months and the HAAS after 1 year and 2 years were higher for CIM TKA. KOOS, FJS-12 and EQ-5D-3L were not different at follow-up. The changes in KOOS symptoms, pain and daily living were higher for OTS TKA. The KSS was higher for patients with CIM TKA. Surgeon satisfaction was high throughout both groups. Patients who were satisfied after 2 years did not differ preoperatively from those who were not satisfied. Postoperatively, all PROMs were better for satisfied patients. Patient satisfaction was not correlated with patient characteristics, implant or preoperative PROMs, and medium to strongly correlated with postoperative PROMs. CONCLUSION: Patient satisfaction was high with no differences between patients with CIM and OTS TKA. Both implant systems improved function, pain and health-related quality of life. Patients with CIM TKA showed superior results in demanding activities as measured by the HAAS. LEVEL OF EVIDENCE: II, prospective cohort study.

Robotic calvarial bone sampling.

The aim of this study was to assess the feasibility of complex unicortical calvarial harvesting by using the Cold Ablation Robot-Guided Laser Osteotome (CARLO® primo+). A cadaveric study was performed with a progressive complexity of the bone harvesting. This preliminary study on the cadaveric cranial vault area examined the tracking precision, the strategies, settings and durations of harvesting, the accuracy of the unicortical bone cutting, and the risk of dura exposition. All sampling was realised with no more difficulty than that experienced during the standard procedure. No bicortical cutting occurred during CARLO® primo + robot-guided laser cutting. During the second sampling, dura was partially exposed due to improper angulation of the curved osteotome during harvesting. Complex unicortical calvarial harvesting using robot-guided laser appears to be feasible and safe. In the future, robotic approaches will probably replace current surgical techniques using cutting guides and help reduce intraoperative inaccuracies due to the human factor.

Improved distinct bone segmentation in upper-body CT through multi-resolution networks.

PURPOSE: Automated distinct bone segmentation from CT scans is widely used in planning and navigation workflows. U-Net variants are known to provide excellent results in supervised semantic segmentation. However, in distinct bone segmentation from upper-body CTs a large field of view and a computationally taxing 3D architecture are required. This leads to low-resolution results lacking detail or localisation errors due to missing spatial context when using high-resolution inputs. METHODS: We propose to solve this problem by using end-to-end trainable segmentation networks that combine several 3D U-Nets working at different resolutions. Our approach, which extends and generalizes HookNet and MRN, captures spatial information at a lower resolution and skips the encoded information to the target network, which operates on smaller high-resolution inputs. We evaluated our proposed architecture against single-resolution networks and performed an ablation study on information concatenation and the number of context networks. RESULTS: Our proposed best network achieves a median DSC of 0.86 taken over all 125 segmented bone classes and reduces the confusion among similar-looking bones in different locations. These results outperform our previously published 3D U-Net baseline results on the task and distinct bone segmentation results reported by other groups. CONCLUSION: The presented multi-resolution 3D U-Nets address current shortcomings in bone segmentation from upper-body CT scans by allowing for capturing a larger field of view while avoiding the cubic growth of the input pixels and intermediate computations that quickly outgrow the computational capacities in 3D. The approach thus improves the accuracy and efficiency of distinct bone segmentation from upper-body CT.

The chemicals between us-First results of the cluster analyses on anatomy embalming procedures in the German-speaking countries.

Hands-on courses utilizing preserved human tissues for educational training offer an important pathway to acquire basic anatomical knowledge. Owing to the reevaluation of formaldehyde limits by the European Commission, a joint approach was chosen by the German-speaking anatomies in Europe (Germany, Austria, Switzerland) to find commonalities among embalming protocols and infrastructure. A survey comprising 537 items was circulated to all anatomies in German-speaking Europe. Clusters were established for "ethanol"-, formaldehyde-based ("FA"), and "other" embalming procedures, depending on the chemicals considered the most relevant for each protocol. The logistical framework, volumes of chemicals, and infrastructure were found to be highly diverse between the groups and protocols. Formaldehyde quantities deployed per annum were three-fold higher in the "FA" (223 L/a) compared to the "ethanol" (71.0 L/a) group, but not for "other" (97.8 L/a), though the volumes injected per body were similar. "FA" was strongly related to table-borne air ventilation and total fixative volumes ≤1000 L. "Ethanol" was strongly related to total fixative volumes >1000 L, ceiling- and floor-borne air ventilation, and explosion-proof facilities. Air ventilation was found to be installed symmetrically in the mortuary and dissection facilities. Certain predictors exist for the interplay between the embalming used in a given infrastructure and technical measures. The here-established cluster analysis may serve as decision supportive tool when considering altering embalming protocols or establishing joint protocols between institutions, following a best practice approach to cater toward best-suited tissue characteristics for educational purposes, while simultaneously addressing future demands on exposure limits.

The quantification of 3D-trabecular architecture of the fourth cervical vertebra using CT osteoabsorptiometry and micro-CT.

BACKGROUND: Bone functional adaptation rationalises the inhomogeneous morphology found in bone. By means of computed tomography osteoabsorptiometry and micro-computed tomography, the mineralisation of the subchondral endplates and trabecular microstructure of vertebral bodies can be assessed to visualise the chronic loading conditions bone endures over time. In this study, we determined cancellous and compartment-specific trabecular architecture in the cervical vertebra to aid with successful integration of orthopaedic implants. METHODS: We examined the micro-computed tomography scans of seven prospectively healthy C4 vertebrae, evaluated their microstructure parameters (bone volume fraction (BV/TV), bone surface density (BS/BV), trabecular thickness (Tb.Th), trabecular separation (Tb.Sp), trabecular number per volume (Tb.N), connectivity density (Conn.D), structure model index (SMI), and degree of anisotropy (DA), and compared the trabecular architecture in twelve predefined volumes of interest: the cranial and caudal 0-10%, 10-15%, and 25-50% in both the ventral and dorsal half. Using computed tomography osteoabsorptiometry, the subchondral bone mineralisation of the subchondral endplates of nine C4 vertebrae was also evaluated. RESULTS: Highest mineralisation is located dorsally at the endplates. Tb.Sp and Tb.N were the only two parameters that displayed significant differences in averaged values of VOI. Nonetheless, distinct, consistent ventral-dorsal modulations were seen in matched sample ventral-dorsal comparison in the BV/TV, BS/BV, and SMI overall levels, as well as in Tb.Th in the three caudal levels. To simplify, the vertebra was split into ventral-cranial, dorsal-cranial, ventral-caudal, and dorsal-caudal equal quarters. The ventral quarters display lower BV/TV, respectively, higher BS/BV and SMI than their sample paired dorsal quarters. The ventral-cranial quarter shows the lowest BV/TV and the highest BS/BV and SMI, describing spacious cancellous bone with rod-like trabeculae. In contrast, the dorsal-caudal quarter exhibits the highest BV/TV and Tb.Th and the lowest BS/BV and SMI, illustrating thicker, denser, and more plate-like trabeculae. The dorsal-cranial and ventral-caudal quarters are comparable and represent intermediate characteristics. CONCLUSIONS: CT-OAM and µCT demonstrate the interdependence of compact and trabecular bone in response to long-term loading conditions. Results show highest mineralisation in the dorso-caudal part of the C4 vertebra. Recommended placement of orthopaedic implants should be positioned dorsally with screws anchored in the dorsal-caudal region.

Influence of size and shape of the auricular surfaces on subchondral bone density distribution in the sacroiliac joint.

The sacroiliac auricular surface has a variable morphology and size. The impact of such variations on subchondral mineralization distribution has not been investigated. Sixty-nine datasets were subjected to CT-osteoabsorptiometry for the qualitative visualization of chronic loading conditions of the subchondral bone plate using color-mapped densitograms based on Hounsfield Units in CT. Auricular surface morphologies were classified into three types based on posterior angle size: Type 1: >160°, Type 2: 130-160° and Type 3: <130°. Auricular surface size was categorized based on the mean value (15.4 cm2 ) separating the group into 'small' and 'large' joint surfaces. Subchondral bone density patterns were qualitatively classified into four color patterns: two marginal patterns (M1 and M2) and two non-marginal patterns (N1 and N2) and each iliac and sacral surface was subsequently categorized. 'Marginal' meant that 60-70% of the surface was less mineralized compared with the highly dense regions and vice versa for the 'non-marginal' patterns. M1 had anterior border mineralization and M2 had mineralization scattered around the borders. N1 had mineralization spread over the whole superior region, N2 had mineralization spread over the superior and anterior regions. Auricular surface area averaged 15.4 ± 3.6 cm2 , with a tendency for males to have larger joint surfaces. Type 2 was the most common (75%) and type 3 the least common morphology (9%). M1 was the most common pattern (62% of surfaces) by sex (males 60%, females 64%) with the anterior border as the densest region in all three morphologies. Sacra have a majority of surfaces with patterns from the marginal group (98%). Ilia have mineralization concentrated at the anterior border (patterns M1 and N2 combined: 83%). Load distribution differences related to auricular surface morphology seems to have little effect on long-term stress-related bone adaptation visualized with CT-osteoabsorptiometry. Higher iliac side mineralization was observed in larger joint surfaces and age-related morphomechanical size alterations were seen in males.

Effect of freezing and embalming of human cadaveric whole head specimens on bone conduction.

BACKGROUND AND AIMS: Conserved specimens do not decay and therefore permit long-term experiments thereby overcoming limited access to fresh (frozen) temporal bones for studies on middle ear mechanics. We used a Thiel conservation method which is mainly based on a watery solution of salts. In contrast to pure Formalin, Thiel conservation aims to preserve the mechanical proprieties of human tissue. The aim of this study is to examine the effect of Thiel conservation on bone conduction in the same specimen before and after conservation. METHODS: Nine ears of five defrosted whole heads were stimulated with a direct, electrically driven, bone anchored hearing system (Baha, Baha SuperPower). The motion produced by bone conduction stimulation was measured with a single point laser Doppler vibrometer (LDV) at the promontory, the ossicular chain, and the round window through a posterior tympanotomy. After the initial experiments, the entire whole heads were placed in Thiel solution. In order to enable direct comparison between fresh frozen and Thiel specimens, our Thiel conservation did not include intravascular and intrathecal perfusion. The measurements were repeated 3 and 12 months later. To determine the effect of freezing, defrosting, and embalming on the whole heads, CT scans were performed at different stages of the experimental procedure. Additionally, three extracted temporal bones were stimulated a Baha, motion of the promontory measured by LDV and embalmed in Thiel solution to investigate the direct impact of Thiel solution on the bone. RESULTS: The averaged magnitude of motion on the promontory increased in whole head specimens by a mean of 10.3 dB after 3 months of Thiel embalming and stayed stable after 12 months. A similar effect was observed for motion at the tympanic membrane (+7.2 dB), the stapes (+9.5 dB), and the round window (+4.0 dB). In contrast to the whole head specimens, the motion of the extracted temporal bones did not change after 3 months of Thiel embalming (-0.04 dB in average). CT scans of the whole heads after conservation showed a notable brain volume loss mostly >50% as well as a remarkable change in the consistency and structure of the brain. Partial changes could already be observed before the Thiel embalming but after 1-2 days of defrosting. In an additional experiment, a substitution of brain mass and weight by Thiel fluid did not lead to new deterioration in sound transmission. In contrast, a frozen (non-defrosted) whole head showed a distinctively reduced magnitude of promontory motion before defrosting. DISCUSSION: For our setup, the vibration of the ear due to bone conduction in the same whole head specimens significantly increased after Thiel conservation. Such an increase was not observed in extracted temporal bone specimens. Due to brain changes in the CT scans, we investigated the consequences of the brain volume changes and structure loss on the frozen brain before defrosting. The loss of brain volume alone could not explain the increase of ear vibrations, as we did not observe a difference when the volume was replaced with Thiel fluid. However, freezing and defrosting of the entire brain seems to have a major influence. Beside the destructive effect of freezing on the brain, the modified conservation method without perfusion changed the brain structure. In conclusion, bone conduction in whole heads depends on the physical condition of the brain, rather than on the conservation.

Auricular surface morphology and surface area does not influence subchondral bone density distribution in the dysfunctional sacroiliac joint.

The subchondral lamella of the sacroiliac auricular surface is morphologically inconsistent. Its morpho-mechanical relationship with dysfunction (SIJD) remains unstudied. Here, the iliac and sacral subchondral bone mineralization is compared between morphological subtypes and in large and small surfaces, in SIJD joints and controls. CT datasets from 29 patients with bilateral or unilateral SIJD were subjected to CT-osteoabsorptiometry. Surface areas and posterior angles were calculated and surfaces were classified by size: small (<15 cm3 ) and large (≥15 cm3 ), and morphological types: 1 (>160°), 2 (130°-160°), and 3 (<130°). Mineralization patterns were identified: two marginal (M1 and M2) and two non-marginal (N1 and N2). Each sacral and iliac surface was subsequently classified. Dysfunctional cohort area averaged 15.0 ± 2.4 cm2 (males 16.2 ± 2.5 cm2 , females 13.7 ± 1.6 cm2 ). No age correlations with surface area were found nor mean Hounsfield Unit differences when comparing sizes, sexes or morphology-type. Controls and dysfunctional cohort comparison revealed differences in female sacra (p = 0.02) and small sacra (p = 0.03). There was low-conformity in marginal and non-marginal patterns, 26% for contralateral non-dysfunctional joints, and 46% for dysfunctional joints. The majority of painful joints was of type 2 morphology (59%), equally distributed between small (49%) and large joints (51%). Larger joints had the highest frequency of dysfunctional joints (72%). Auricular surface morphology seems to have little impact on pain-related subchondral lamella adaptation in SIJD. Larger joints may be predisposed to the onset of pain due to the weakening of the extracapsular structures. Dysfunctional joints reflect common conformity patterns of sacral-apex mineralization with corresponding superior corner iliac mineralization.

[CME-Sonography 106: Subacromial Bursa - A Myth]. / CME Sonografie 106: Bursa subacromialis ­ ein Mythos CME-Fragen.

CME-Sonography 106: Subacromial Bursa - A Myth Abstract. In everyday clinical practice, we frequently encounter bursitis. It can occur in practically any joint region, for example in local mechanical overload situations, after a trauma or in the context of an inflammatory systemic disease. In this review we focus on the location of bursitis in the shoulder region and would like to contribute to get away from the "myth" called subacromial bursitis.

Cold ablation robot-guided laser osteotomy in hand, wrist and forearm surgery-A feasibility study.

INTRODUCTION: Traditional bone surgery using saws and chisels is associated with direct contact of instruments with the bone causing friction, heat and pressure and hence, damaging the bone and the surrounding soft tissues. METHOD: Cold ablation laser osteotomy offers new possibilities to perform corrective osteotomies in the field of bone surgery. We introduce the technology of navigated cold ablation robot-guided laser osteotomy, present potential applications, and preliminary pre-clinical cadaver test results in the field of hand-, wrist- and forearm surgery. RESULTS: The cadaver tests showed first promising results for corrections in all planes and axes using different cutting patterns. CONCLUSION: Cold ablation laser osteotomy seems to be a feasible new method to perform osteotomies in the field of hand-, wrist- and forearm surgery. Primary osseous stability could be achieved using various cutting patterns which could lead to reduction of the amount of hardware required for osteosynthesis. Further tests are required to proof the latter and precision.

Improved distinct bone segmentation from upper-body CT using binary-prediction-enhanced multi-class inference.

PURPOSE: Automated distinct bone segmentation has many applications in planning and navigation tasks. 3D U-Nets have previously been used to segment distinct bones in the upper body, but their performance is not yet optimal. Their most substantial source of error lies not in confusing one bone for another, but in confusing background with bone-tissue. METHODS: In this work, we propose binary-prediction-enhanced multi-class (BEM) inference, which takes into account an additional binary background/bone-tissue prediction, to improve the multi-class distinct bone segmentation. We evaluate the method using different ways of obtaining the binary prediction, contrasting a two-stage approach to four networks with two segmentation heads. We perform our experiments on two datasets: An in-house dataset comprising 16 upper-body CT scans with voxelwise labelling into 126 distinct classes, and a public dataset containing 50 synthetic CT scans, with 41 different classes. RESULTS: The most successful network with two segmentation heads achieves a class-median Dice coefficient of 0.85 on cross-validation with the upper-body CT dataset. These results outperform both our previously published 3D U-Net baseline with standard inference, and previously reported results from other groups. On the synthetic dataset, we also obtain improved results when using BEM-inference. CONCLUSION: Using a binary bone-tissue/background prediction as guidance during inference improves distinct bone segmentation from upper-body CT scans and from the synthetic dataset. The results are robust to multiple ways of obtaining the bone-tissue segmentation and hold for the two-stage approach as well as for networks with two segmentation heads.

Computed tomography osteoabsorptiometry for imaging of degenerative disc disease.

BACKGROUND: Lower back pain is a common condition with significant morbidity and economic impact. The pathophysiology is poorly understood but is in part attributable to degenerative disc disease (DDD). The healthy intervertebral disc ensures spine functionality by transferring the perceived load to the caudally adjacent vertebrae. The exposure to recurring mechanical load is mirrored in the mineralization pattern of the subchondral bone plate (SBP), where increased bone density is a sign of repetitive localized high stress. Computed tomography -osteoabsorptiometry (CT-OAM) is a technique based on conventional CT scans that displays the mineral density distribution in the SBP as a surface-color map. The objective of this study was to measure and analyze the SBP mineral density patterns of healthy lumbar intervertebral disc (IVDs) and those suffering DDD using CT-OAM densitograms. These findings should provide in vitro insight into the long-term morphological properties of the IVD and how these differ in the state of disc degeneration. METHODS: The CT-data sets of spines from 17 healthy individuals and 18 patients displaying DDD in the lumbar spine were acquired. Individual vertebrae of both cohorts were 3D reconstructed, processed using image analysis software, and compared to one another. Maximum intensity projection of the subchondral mineralization provided surface densitograms of the SBP. The relative calcium concentration, the local maxima of mineralization, and a mean surface projection of level-defined SBPs were calculated from the densitogram and statistically compared. RESULTS: The inferior SBP, adjacent to degenerating disc, display an 18-41 % higher relative calcium concentration than their healthy counterparts. In the opposing superior SBPs the relative calcium content is significantly increased. Whereas it is reasonably consistent for L1-L3 (L1: 132 %, L2: 127 %, L3: 120 %), the increase grows in caudal direction (L4: 131 %, L5: 148 %, S1: 152 %). Furthermore, a change in the areal distribution of excessive mineralization can be differentiated between healthy and diseased motion segments. CONCLUSIONS: The acquired data provide in vitro proof of the mechanical and anatomical properties of the SBP in relation to the state of disc degeneration. In conjunction with the diagnostic use of CT-osteoabsorptiometry, our data provide a basis for a non-invasive and sensitive technique that correlates with disc functionality. This could be promising in various cases, from early identification of early stages of DDD, tracking disease progression, and assessing the repercussions of surgical procedures or experimental therapies.

The sylvian keyhole approach for surgical clipping of middle cerebral artery aneurysms: Technical nuance to the minipterional craniotomy.

Background: The minipterional (MPT) craniotomy is a workhorse approach for clipping of middle cerebral artery (MCA) aneurysms. Because it aims to reach the skull base, traction on the temporal muscle is required. As a result, patients may suffer from transient postoperative temporal muscle discomfort. The sylvian keyhole approach (SKA) represents an alternative craniotomy for the clipping of MCA aneurysms. The aims of this study are to describe the operative technique of the SKA and to discuss the benefits and disadvantages compared to the MPT craniotomy. Methods: In this technical note, we report the experience gained with the SKA. This experience was acquired with virtual reality, 3D-printed models, and anatomical dissections. We also present two clinical cases. Results: The SKA is centered on the distal sylvian fissure and tailored toward the specific MCA aneurysm. Traction to the temporal muscle is not necessary because access to the skull base is not sought. With the SKA, dissection of the MCA is performed from distal to proximal, aiming for a proximal control at the level of the M1-segment. The limen insulae was identified as a key anatomical landmark for approach selection. The SKA offers good surgical maneuverability when the aneurysm is located at the level or distal to the limen. The MPT craniotomy, however, remains the most appropriate approach when the aneurysm is located proximal to the limen. Conclusion: The SKA represents a feasible and innovative alternative approach to the MPT craniotomy for surgical clipping of unruptured MCA aneurysms located at the level or distal to the limen insulae.

The human masseter muscle revisited: First description of its coronoid part.

INTRODUCTION: The masseter muscle is considered to be bilayered, consisting of a superficial and a deep part. However, a few historical texts mention the possible existence of a third layer as well, but they are extremely inconsistent as to its position. Here we performed an anatomical study to clarify the presence and morphological characteristics of a distinct third layer of the masseter muscle. MATERIALS AND METHODS: We dissected 12 formaldehyde-fixed human cadaver heads, analysed CTs of 16 fresh cadavers, evaluated MR data from one living subject and examined histological sections using methyl methacrylate embedding of one formaldehyde-preserved head. RESULTS: An anatomically distinct, deep third layer of the masseter muscle was consistently demonstrated, running from the medial surface of the zygomatic process of the temporal bone to the root and posterior margin of the coronoid process. Ours is the first detailed description of this part of the masseter muscle. CONCLUSIONS: To facilitate discussion of this newly described part of the masseter, we recommend the name M. masseter pars coronoidea (coronoid part of the masseter) as a further reference. The arrangement of its muscle fibers suggest it being involved in stabilising the mandible by elevating and retracting the coronoid process.

CT-based and morphological comparison of glenoid inclination and version angles and mineralisation distribution in human body donors.

BACKGROUND: For optimal prosthetic anchoring in omarthritis surgery, a differentiated knowledge on the mineralisation distribution of the glenoid is important. However, database on the mineralisation of diseased joints and potential relations with glenoid angles is limited. METHODS: Shoulder specimens from ten female and nine male body donors with an average age of 81.5 years were investigated. Using 3D-CT-multiplanar reconstruction, glenoid inclination and retroversion angles were measured, and osteoarthritis signs graded. Computed Tomography-Osteoabsorptiometry (CT-OAM) is an established method to determine the subchondral bone plate mineralisation, which has been demonstrated to serve as marker for the long-term loading history of joints. Based on mineralisation distribution mappings of healthy shoulder specimens, physiological and different CT-OAM patterns were compared with glenoid angles. RESULTS: Osteoarthritis grades were 0-I in 52.6% of the 3D-CT-scans, grades II-III in 34.3%, and grade IV in 13.2%, with in females twice as frequently (45%) higher grades (III, IV) than in males (22%, III). The average inclination angle was 8.4°. In glenoids with inclination ≤10°, mineralisation was predominantly centrally distributed and tended to shift more cranially when the inclination raised to > 10°. The average retroversion angle was - 5.2°. A dorsally enhanced mineralisation distribution was found in glenoids with versions from - 15.9° to + 1.7°. A predominantly centrally distributed mineralisation was accompanied by a narrower range of retroversion angles between - 10° to - 0.4°. CONCLUSIONS: This study is one of the first to combine CT-based analyses of glenoid angles and mineralisation distribution in an elderly population. The data set is limited to 19 individuals, however, indicates that superior inclination between 0° and 10°-15°, and dorsal version ranging between - 9° to - 3° may be predominantly associated with anterior and central mineralisation patterns previously classified as physiological for the shoulder joint. The current basic research findings may serve as basic data set for future studies addressing the glenoid geometry for treatment planning in omarthritis.

Fluoroscopy of the Elbow: A Cadaveric Study Defining New Standard Projections to Visualize Important Anatomical Landmarks.

BACKGROUND: Despite new 3-dimensional imaging modalities, 2-dimensional fluoroscopy remains the standard intraoperative imaging modality. The elbow has complex anatomy, and defined standard fluoroscopic projections are lacking. Therefore, the aim of this study was to define standard projections of the elbow for intraoperative fluoroscopy. METHODS: This study consisted of 2 parts. In part I, dissected cadaveric elbows were examined under fluoroscopy, and their radiographic anatomical features were assessed, with focus on projections showing defined anatomical landmarks. In part II, projections from part I were verified on entire cadavers to simulate intraoperative imaging. Standard projections for anteroposterior (AP) and lateral views as well as oblique and axial views were recorded. RESULTS: Eight standardized projections could be defined and included 3 AP, 1 lateral, 2 oblique, and 2 axial views. By applying these specific projections, we could visualize the epicondyles, the trochlea with its medial and lateral borders, the capitellum, the olecranon, the greater sigmoid notch, the coronoid process including its anteromedial facet, the proximal radioulnar joint with the radial tuberosity, and the anterior and posterior joint lines of the distal part of the humerus. These standard projections were reliably obtained using a specific sequence. CONCLUSIONS: Knowledge about radiographic anatomy and standard projections is essential for visualizing important landmarks. With the presented standard projections of the elbow, important anatomical landmarks can be clearly examined. Thus, fluoroscopic visualization of anatomical fracture reduction and correct implant placement should be facilitated. CLINICAL RELEVANCE: This basic science cadaveric study defines fluoroscopic standard projections of the elbow essential for visualization of anatomical landmarks during surgery.